Sales, Field Service, Training – Call 877-527-3745
Do you have high tools usage areas?
High srap rate?
High quality rejects?
Low throughput / uptime?
The spindle alignment system is an excellent tool for:
Transfer lines
Dial/Ring machines
Headstock/Tailstock
Alignment can play a large factor in the efficiency of an operation. By applying the L-700 spindle alignment system see immediate results and get the most from drills, taps, reamers, and all of your cutting tools.
Also ask us about other straight-line applications we have used the spindle system for.
Bore alignment system
The L-705/706 Line Master Laser is a front mount, rear adjust laser for many unique applications. Originally designed for extruder barrel alignment.
Extruder alignment
Bore alignment
Turbine alignment
Engine Blocks
The S-650 Shaft Alignment System
4 axis simultaneous display
Largest target cell on the market (40mm)
Sub micron resolution
FM Based IR remote (no cords)
Adjustable Beam
Automatic target sensing of "start" and "stop" cycles
Low 45° sweep angle
30' operating range
Real time processing – view alignments as they are being performed
Angle is not calculated!
EL-905 Electronic Level
Accurate to 0.5 arc seconds (.00003"/ft., 0.0025 mm/M)
Range: 1200 arc seconds (0.07"/ft., 5.8 mm/M)
Large easy to read display that rotates 360°
Displays arc seconds, inches/10" or mm/M
Half the price of standard electronic levels
Geometry Laser Alignment Tools Align: machine tools, injection-molding machines, transfer lines, Rolls (plastic, film, paper, printing, steel), stamping presses, surface plates, sole plates, anything that needs to be flat, straight, square, and parallel.
The L-743/L-730 Triple Scan Laser produces three mutually perpendicular laser planes. This allows allows the user to measure x, y, and z simultaneously.
A -1519/1520 Target
Battery operated
Wireless communication
1" measuring range
3 different models of accuracy (.0005", .0001", or .00005")
A-1530 Height Gauge Target 2', 4', or 6' poles. Accurate to ±.001" in 69" maximum measuring range.
The L-740/L-730 is used to measure level, flat, parallel or straight line applications. Excellent for leveling and flat work.
