Maintenance Diagnostic Systems, Inc.

Industries Served:

Automotive
Aerospace
Plastics
Steel
Machine Tool
Medical Device
Ship Building
Woodworking
Robotics
Textile
Paper
Blown Film
Printing
Film
Fiber Optics
Extrusion/Sheet
Power Generation

UP100KT

SON-OF-A-GUN!

ULTRAPROBE® 100

ANALOG ULTRASONIC INSPECTION SYSTEM

HOW ULTRASONIC TECHNOLOGY WORKS FOR YOU

The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges. It electronically translates these signals by heterodyning them down into the audible range so that a user can hear these sounds through a headset and see them as intensity increments on the meter. Heterodyning works the same as a radio in that it accurately transforms the sounds so that they are easily recognized and understood.

The advantage of Ultrasound technology is simple to understand. Ultrasound is a high frequency, short wave signal. When compared with the sounds we humans can hear, the size of the sound waves are extremely small. This property provides advantages:

  • Ultrasound is very directional
  • Ultrasound can be easily blocked or shielded
  • Ultrasound instruments can be used in noisy environments
  • Ultrasound changes provide early warning of potential problems
  • Ultrasound instruments are easy to use

UP100 SPECIFICATIONS *

Construction:Handheld ABS pistol type ultrasonic processor, stainless steel sensor enclosures
Circuitry:SMD/Solid State hybrid heterodyne receiver
Frequency Response:20-100 kHz (centered at 38-42 kHz)
Indicator:10 segment LED bargraph (red)
Sensitivity Selection:8 position precision attenuation
Power:9 Volt Alkaline Battery
Low Battery Voltage Indicator:LED
Headset:Noise isolating type: double headset wired monophonic impedance; 16 ohms. Over 23 dB noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
Probes:Scanning Module (SCM-1) Stainless Steel Unisonic (single transducer) piezo electric crystal type; Stethoscope/Contact Module (STM-1) Stainless Steel plug-in type with 5.5" Stainless Steel Waveguide.
Rubber Focusing Probe:Shields stray ultrasonic signals & focuses detected signals.
Transmitter:Patented warble tone transmission
Response Time:300 m. sec.
Ambient Operating Temperature Range:32°-120°F (0°-50°C)
Relative Humidity:10-95% non condensing at up to 86°F (30°C)
Storage Temperature:0°-130°F (-18°-54°C)
Warranty:One year, parts/labor. (Details available on request)
Dimensions:5.25" x 2" x 8"
13.3cm x 5cm x 20.3cm
Weight:11 oz (.3kg)
Carrying Case:Nylon soft carry case with die cut foam

* In an effort to provide the highest quality, specifications are subject to change without notice

UP100KT ULTRAPROBE 100 KIT

UP100 pistol housing with LED bargraph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, warble tone generator with battery recharger, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.